Ricoh SP 330SN User Manual page 408

10. Troubleshooting
2. Carefully slide tray 1 back in until it stops.
3. If paper is loaded in the bypass tray, remove the paper.
4. Close the bypass tray.
5. Push the side button to open the front cover, and then carefully lower it.
6. Hold the center of the print cartridge and carefully raise it slightly and then pull it out
horizontally.
• Do not shake the removed print cartridge. Doing so can cause remaining toner to leak.
• Place the print cartridge on paper or similar material to avoid dirtying your workspace.
7. Lifting the guide plate, remove the jammed paper carefully.
406
DYH062
DYH063
DYG290