Ricoh SP 330SN User Manual page 299

Default: 0 for all parameters
Item
Horiz.: Tray 1 Select this to adjust the tray 1 registration horizontally.
Horiz.: Tray 2 Select this to adjust the tray 2 registration horizontally.
Vert.: Tray 1 Select this to adjust the tray 1 registration vertically.
Vert.: Tray 2 Select this to adjust the tray 2 registration vertically.
Horiz.: Bypass Select this to adjust the bypass tray registration horizontally.
Tray
Vert.: Bypass Select this to adjust the bypass tray registration vertically.
Tray
Horiz.: Duplex: Select this to adjust the registration of the back of duplex printing horizontally.
Back
Vert.: Duplex: Select this to adjust the registration of the back of duplex printing vertically.
Back
Low Humidity Mode
Item
Low Humidity If the machine is used in a room where
Mode humidity level is low, black lines of a
few millimeters thick may appear on
printouts with 75-millimeter spaces in
between. Selecting [On] for this setting
may prevent these lines from
appearing (wait for about one day
until this setting becomes effective).
Note that when this setting is enabled,
the machine automatically performs
self-maintenance in every 10 minutes.
System Settings (When Using the Four-line LCD Panel Model)
Description
Description Value
• Off
• On
Default: [Off]
297