Ricoh SP 330SN User Manual page 213

1. Press the [Home] key.
2. Press the [Fax] icon on the [Home] screen.
3. Add a destination by using one of the following methods:
• To add a Quick Dial destination: press [Address Book], press the [Quick Dial List] tab, select a
destination, and then press [OK].
• To add a Speed Dial destination: press [Address Book], press the [Speed Dial List] tab, select
a destination, and then press [OK].
• To add a manually-specified destination: press [Manual Entry], press the box, enter the
destination fax number, and then press [OK] twice.
• While specifying multiple destinations, you can press the [Clear/Stop] key to clear all destinations.
• If you specify multiple destinations in Immediate Transmission mode, the mode switches to Memory
Transmission mode temporarily.
• While broadcasting, pressing [Clear] cancels the fax to the current destination only.
Specifying the destination using the redial function
You can specify the last used destination as the destination for the current job.
This function saves time when you are sending to the same destination repeatedly, as you do not have to
enter the destination each time.
DYG322
Sending a Fax
211