When You Cannot Make Copies As Wanted - Ricoh SP 330SN User Manual

10. Troubleshooting
Problem
When copying from the exposure
glass, the print area of the copy is
out of alignment with the original.

When You Cannot Make Copies as Wanted

Problem
Photocopied pages are not in
correct order.
Copied pages are too dark or too
light.
430
Place the original copy side down, making sure that it is
aligned to the rear left corner and pressed flat against the
exposure glass.
When Using the Touch Panel Model
On the control panel, change the [Sort] setting under copy
settings to collate pages as you require. For details about
[Sort], see page 239 "Copier Features Settings (When Using
the Touch Panel Model)".
When Using the Four-line LCD Panel Model
On the control panel, change the [Sort] setting under copy
settings to collate pages as you require. For details about
[Sort], see page 287 "Copier Features Settings (When Using
the Four-line LCD Panel Model)".
Adjust the image density. See page 135 "Adjusting Image
Density".
Solution
Solution