Ricoh SP 330SN User Manual page 275

Item
Function Priority Specifies the mode that is
activated when the power is
turned on, or if the time
specified for [System Reset
Timer] elapses without
activity while the initial
screen of the current mode is
displayed.
System Reset Sets the machine to return to
Timer the mode specified in
[Function Priority].
This setting is also applied to
the timeout for copying the
next document while ID card
copy and manual 2-sided
copy is performed.
Energy Saver Sets the machine to enter
Mode Energy Saver mode, Energy
Saver mode 1 or Energy
Saver mode 2, to reduce
power consumption. The
machine recovers from
Energy Saver mode when it
receives a print job, prints a
received fax, or one of the
keys on the control panel is
pressed.
Administrator Tools Settings (When Using the Touch Panel Model)
Description
• Home
• Copier
• Facsimile
• Scanner
Default: [Home]
• 30 sec.
• 1 min.
• 2 min.
• 3 min.
• 5 min.
• 10 min.
• Off
Default: [1 min.]
• EnergySaverMode 1
Value
The machine enters Energy Saver mode 1 if
the machine has been idle for about 30
seconds. It takes less time to recover from
Energy Saver mode 1 than from power-off
state or Energy Saver mode 2, but power
consumption is higher in Energy Saver mode 1
than in Energy Saver mode 2.
• Off
• On
Default: [Off]
273