Ricoh SP 330SN User Manual page 160

5. Scanning Originals
9. If you have more originals to scan, place the next original on the exposure glass,
and then press [Yes]. Repeat this step until all originals are scanned.
10. When all originals have been scanned, press [No] to start sending the scanned file.
When using the four-line LCD panel model
1. Place the original on the exposure glass or in the ADF.
To place the original, see page 89 "Placing Originals".
2. Press the [Scanner] key, and then select [Dest.].
Alternatively, you can press the [Shortcut to Func.] key if [Shortcut to Function] under [Admin.
Tools] is set to [Select Scanner Address]. For [Shortcut to Function], see page 310
"Administrator Tools Settings (When Using the Four-line LCD Panel Model)".
3. Make sure [Search Address Book] is selected, and then press the [OK] key.
4. If you want to search for a specific entry by its name, enter the first letters of the
name using the number keys, and then press the [OK] key. Each time you enter a
character, the display changes to show the matching name.
5. Search for the desired destination by pressing the [ ] or [ ] key to scroll the Address
Book, and then press the [OK] key.
When you specify a scan destination, the machine's scan settings change automatically
according to the information registered for that destination in the Address Book. If necessary,
you can change the scan settings using the control panel. For scan settings, see page 292
"Scanner Features Settings (When Using the Four-line LCD Panel Model)".
158
DYG326