Specifying A Custom Paper Size - Ricoh SP 330SN User Manual
Laser all-in-one printer
Hide thumbs
Also See for SP 330SN:
- User manual (476 pages) ,
- Manual (26 pages) ,
- Service manual (333 pages)
Table of Contents
Advertisement
5.
Press the [User Tools] key to return to the initial screen.
• You can press the [Back] key to exit to the previous level of the menu tree.
Specifying a Custom Paper Size
This section describes how to specify a custom paper size.
• Custom size paper cannot be loaded in tray 2.
• When you perform printing, make sure that the paper size specified with the printer driver matches
the paper size specified with the control panel. If a paper size mismatch occurs, a message
appears on the display. To ignore the error and print using mismatched paper, see page 99 "If a
Paper Mismatch Occurs".
When Using the Touch Panel Model
1.
Press the [Home] key.
2.
Press the [Setting] icon on the [Home] screen.
3.
Press [Paper Settings].
4.
Select the tray for which you want to specify the paper size.
5.
Press [ ].
6.
Press [Custom Size].
7.
Select [mm] or [inch].
8.
Press the box next to [Horiz:] twice.
9.
Enter the horizontal size, and then press [OK].
10.
Press the box next to [Vert:] twice.
11.
Enter the vertical size, and then press [OK].
Specifying Paper Type and Paper Size Using the Control Panel
DYG322
67
Advertisement
Table of Contents
Troubleshooting
