Specifying Scan Settings for Copying
This section describes how to specify image density and scan quality for the current job.
Adjusting Image Density
There are five image density levels. The higher the density level, the darker the printout.
When using the touch panel model
1.
Press the [Home] key.
2.
Press the [Copier] icon on the [Home] screen.
3.
Press [Text/Photo].
4.
Press [ ] or [ ] to select the desired density level, and then press [OK].
When using the four-line LCD panel model
1.
Press the [Density] key.
2.
Press the [ ] or [ ] key to select the desired density level, and then press the [OK]
key.
Specifying Scan Settings for Copying
DYG322
DYG320
135