Ricoh SP 330SN User Manual page 210

6. Sending and Receiving a Fax
Canceling a transmission after the original is scanned (while a transmission is in
progress)
Use this procedure to delete a file that is being sent after the original is scanned.
1. Press the [Clear/Stop] key while "Transmitting..." is displayed on the display.
2. Press [Fax Jobs] on the [Cancel Jobs] screen.
• If you cancel a document while it is being sent, the transmission is halted as soon as you finish the
cancellation procedure. However, some pages of the document may already have been sent and
received at the other end.
• If the transmission finishes while this procedure is being processed, the transmission is not canceled.
• If you cancel sending a fax while broadcasting, only the fax to the current destination is canceled.
The fax will be sent to the subsequent destinations as normal. For details about sending a fax using
the broadcast function, see page 209 "Specifying the Fax Destination".
Canceling a transmission after the original is scanned (before a transmission starts)
Use this procedure to delete a file stored in memory before its transmission starts.
Use the following procedure to delete a file stored in memory (such as automatic redial) before its
transmission starts.
1. Confirm that the initial screen for Fax mode is shown on the display.
For details about the initial screen, see page 196 "Fax Mode Screen".
2. Press [Tx File].
3. Select the file you want to delete.
• To delete a file
Select the file you want to delete, and then press [Delete]. Press [Yes] when the message
appears.
• To delete all files
208
DYG330