Ricoh SP 330SN User Manual page 322

7. Configuring the Machine Using the Control Panel
Wireless (Wi-Fi)
Item
Enable
Wireless (Wi-
Fi)
Wireless (Wi-
Fi) Status
MAC Address
Current
Connection
Input SSID
WPS
Wi-Fi Direct
Wi-Fi Dir.
PWD
Wi-Fi Direct
Type
IPv4 Configuration
Item
DHCP
320
Description
Select whether to enable or disable
Wireless LAN.
If [Disable] is set, [Wireless (Wi-Fi)
Status], [MAC Address], [Current
Connection], [Input SSID], [WPS],
[Wi-Fi Direct], [Wi-Fi Dir. PWD], and
[Wi-Fi Direct Type] are not displayed.
Displays the current connection status.
Displays the machine's MAC address.
Displays detailed information about
the connection, such as the SSID and
the wireless signal strength.
Input the SSID of the machine.
Connects with one touch using WPS
(Wi-Fi Protected Setup). For details,
see Setup Guide.
Input the SSID of the machine to
configure Wi-Fi Direct.
Input SSID to set a password for Wi-Fi
Direct.
Select 2.4 GHz or 5 GHz as the
wireless LAN frequency.
Description
Sets the machine to receive its IPv4
address, subnet mask, and default
gateway address automatically from a
DHCP server.
Value
• Disable
• Enable
Default: [Disable]
-
-
-
-
• PBC
• PIN
-
-
• 2.4 GHz
• 5 GHz
Default: [2.4 GHz]
Value
• Inactive
• Active
Default: [Active]