Ricoh SP 330SN User Manual page 339

Bypass Tray Setting Priority
Item
Bypass Tray Setting
Priority
Size mismatch detection
Item
Size mismatch
detection
• The information about Tray 2 appears only when it is installed.
Select how print jobs using the bypass tray are handled.
• System Settings
The paper settings configured on the machine's control panel are
applied to all print jobs. An error occurs when the paper settings
specified by the printer driver or the print command do not match the
machine's settings.
• Any Size/Type
Printing proceeds even if the paper size/type settings of the machine
and printer driver do not match, but if the paper is too small for the
print job, the printed image will be cropped.
• Any Custom Size/Type
The machine prints custom size print jobs according to the printer
driver's settings and prints standard size print jobs according to the
machine's settings.
For custom size print jobs, printing proceeds even if the paper size/
type settings of the machine and printer driver do not match, but if the
paper is too small for the print job, the printed image will be cropped.
For standard size print jobs, an error will occur if the paper size/type
settings of the machine and printer driver do not match.
Select whether to set the machine to report an error if the paper size does
not match the print job's settings.
Configuring the System Settings
Description
Description
337