Specifying The Scan Settings; Adjusting Image Density - Ricoh SP 203SF Manual

4. Copying Originals

Specifying the Scan Settings

MF
This section describes how to specify image density and scan quality for the current job.
MF

Adjusting Image Density

FiO
There are five image density levels. The higher the density level, the darker the printout.
1. Press the [Copy] key.
ctt124.pdf (alt="Copy key
2. Press the [
standby mode screen to select [Density], and then press the [OK] key.
3. Press the [
select the density level, and then press the [OK] key.
4. Press the [
• To apply the specified setting to all jobs, specify [Density] in [Copier Features].
Adjusting Image Density
TiO
There are three image density levels. The higher the density level, the darker the printout.
92
illustration" title="")
(alt="Down arrow key"
(alt="Down arrow key"
(alt="Left arrow key" title="")] key to return to the initial screen.
CTT124
title="")] or [ (alt="Up arrow
title="")] or [ (alt="Up arrow
opal-p1_mf1_wi-fi_user_guide_gb_00104834_eng.xml
key" title="")] key in the
key" title="")] key to
Draft 2013/03/07