Table of Contents
Advertisement
1 About this manual
1 About this manual
1.1 Structure of this manual
The introduction of this manual essentially comprises three parts. The first part of
1
the introduction lists general specifications, the symbols used in the manual and
the structure of notices are presented and a risk assessment is provided. It also in-
cludes specifications for transport and storage of the gas chromatograph PGC
9300.
The PGC 9300 can be operated in explosion-protected zones. The second part of
the introduction covers the conditions that must be observed for operation in such
areas and describes the explosion protection.
The third part of the introduction describes recurrent inspection and maintenance
tasks. Since the PGC 9300 "consumes" gases in order to be able to conduct an
analysis of the gas components, these regular maintenance tasks are necessary
for the proper function of the PGC 9300.
The second chapter provides brief instructions for connecting the PGC 9300. In
particular, the electrical and mechanical connections are sketched. The "correct"
starting up then takes place together with the controller of the GC 9300 and is de-
scribed in the manual of this GC 9300.
The method of operation and the intended use of the PGC 9300 are described in
the third chapter. The fourth chapter describes the electrical and mechanical con-
nections and relevant conditions for further operation. Automated operation and
the various calibrations during operation are covered in chapter 5.
The appendix contains the technical data, error messages, information about a
flushing unit pre-filter, sample circuit diagrams and a summary of the approvals.
Manual PGC 9300 EN07 June, 18th 2018
Advertisement
Table of Contents
