1 Introduction
1.2 Purpose of the manual
This manual provides information that is necessary for fault-free and safe operation.
The TME 400 was designed and produced according to the state of the art and gen-
erally recognized safety standards and directives. However, its use can entail dan-
gers that are avoidable by complying with this manual. The device must only be used
2
as intended and in technically sound condition.
Warning
Unintended use voids all warranty claims and the TME 400 can also lose its
approvals.
1.2.1
The following abbreviations are used:
TME 400-VM
TME 400-VMF The TME 400-VMF is a turbine gas meter that is used in custody-
TME 400-VC
TME 400-VCF
Note
This manual only describes the TME 400-VM and TME 400-VMF.
Manual TME400-VMF · EN11 · January 22nd, 2024
Abbreviations
The TME 400-VM is a turbine meter which is used for non-cus-
tody-transfer volume measurement (Volume Measurement) of the
operating volume of non-aggressive gases and combustion fuels
is used.
transfer applications (Fiscally). The designation TME 400-VMF
comprises all turbine meters.
The TME 400-VC also enables calculation of the standard volume
flow (Volume Corrector) from the operating volume flow in non-
custody-transfer applications.
The TME 400-VCF is used in custody-transfer applications (Fis-
cally). In addition to the turbine meter, the TME 400-VCF designa-
tion also includes the volume corrector.