Components For Altering Operating Range - YASKAWA MOTOMAN-MPL100 Instructions Manual

157569-1CD
MPL100

5.5.1 Components for Altering Operating Range

5 Basic Specifications
5.5 Alterable Operating Range
When modifying the operating range of the S-axis, prepare the
components shown in Fig. 5-4 "Components of S-Axis Stopper" referring to
the following list.
(1) Pin (drawing No. HW0407007-1, 1 pin)
(2) Stopper (drawing No. HW0307574-1, 1 stopper)
(3) Hexagon head screw M20
(length: 70 mm, tensile strength: 1200 N/mm
(4) Flat washer M20 (3 flat washers)
Fig. 5-4: Components of S-Axis Stopper
Section A-A'
Pin
(HW0407007-1)
5-5
2
Hexagon head screw M20
(length: 70 mm, tensile strength: 1200 N/mm
Washer M20 (3 washers)
Stopper
(HW0307574-1)
A A'
HW0485652
or more, 3 screws)
2
or more, 3 screws)
33 of 106