Print Without Winding - Oce Colorado 1640 Operation Manual

Print without winding

Print without winding
Introduction
You can also print without winding. Media that is printed without winding can be transported
well and is not too weak.
Before you begin
• Check the media category of your media. Media categories that need a tension bar cannot be
printed without winding.
• Printing without winding is set in the media type configuration in the RIP software. For printing
without winding you must select [no tension bar] under [Winding tension]. For more
information, see
• The printer is ready to print.
Procedure
1. On the operator panel tap on the [Output] icon.
2. Make sure [Wind the output] is set to [No].
NOTE
Make sure you set the output configuration in time, as you cannot change the
configuration once the media has passed the clamp.
90 Chapter 3 - Handle the media
Change the media settings on page
55.