Enable The Use Of Https - Oce Colorado 1640 Operation Manual

Enable the use of HTTPS

Enable the use of HTTPS
Introduction
You can enable the use of HTTPS to establish a secure communication between a browser and
the controller for the settings editor access.
To enable the use of HTTPS you have to install a valid identity certificate on the controller. In
order to do this you have to:
1. Make a certificate request on the controller
2. Receive a valid certificate from the certificate request
3. Upload the valid certificate on the controller
Procedure
1. Open the settings editor.
2. Click on [Configuration] →[Security].
3. Click on [Edit] in the [Identity certificate] header.
4. Fill in the information for the certificate request:
1. Fill in the fully qualified domain name of the printer under [Common name].
2. It is advised to fill in the alternative names (e.g. hostname or IP address) to guarantee access
to the printer from any browser.
5. Click on [Ok].
A new window opens.
6. Click on [Create request file].
A line with [req.csr] appears under the button.
184 Chapter 7 - Configure the network and security settings