Vacuum The Chiller - Oce Colorado 1640 Operation Manual

Vacuum the chiller

Introduction
It is advised to vacuum the chiller every month to keep the printer in the best condition.
Vacuuming the chiller is part of periodic maintenance so the operator panel gives a warning
when you should vacuum the chiller.
Before you begin
Use Océ Colorado 1640 prescribed:
• Screwdriver (Torx-25)
• Vacuum cleaner with a brush head
Procedure
1. Go to the chiller side and locate the cover under the fan.
2. Unscrew the left and right screws on top of the cover with the Torx-25.
Vacuum the chiller
Chapter 5 - Maintain the system 155