Clean the matrix plate
Before you begin
Use Océ Colorado 1640 prescribed:
• Nitrile gloves for handling ink
• Foams and swabs
• Matrix plate cleaning tool
• Cleaning liquid (Methyl benzoate)
NOTE
For information on the prescribed maintenance materials, see
maintenance materials on page
CAUTION
Wear the Océ Colorado 1640 prescribed nitrile gloves. You can only wear the gloves for ten
minutes. After ten minutes you must put on new gloves to prevent contact with the ink.
IMPORTANT
Use the prescribed cleaning liquid. Do not use any other cleaners.
Procedure
1. Start the maintenance action via the operator panel. For more information, see
maintenance on page
2. Put on the Océ Colorado 1640 approved nitrile gloves.
3. Take a new and clean piece of matrix plate cleaning foam and put it in the holder of the cleaning
tool.
4. Take the matrix plate cleaning tool, go to the media input side and locate the manual
maintenance door on the left.
160.
115.
Clean the matrix plate
List of Océ Colorado 1640
Start manual
Chapter 5 - Maintain the system
121