Use The Prismasync Remote Control App - Oce Colorado 1640 Operation Manual

Use the PRISMAsync Remote Control app

Introduction
With the PRISMAsync Remote Control app you can monitor your Océ Colorado 1640 at a
distance.
Before you begin
To use the PRISMAsync Remote Control app you need a mobile device with:
• Google Android 4.1 or higher
• Apple iOS 7 or higher
• Remote connection on the printer must be enabled and working. For more information, see
Test PRISMAsync Remote Control on page
NOTE
You do not need a license for the PRISMAsync Remote Control app.
Procedure
1. Make sure the System administrator has added your email address as a PRISMAsync cloud
services user for the Océ Colorado 1640. For more information, see
Remote Control on page
2. Download the PRISMAsync Remote Control app via the Google Play Store or Apple App Store
onto your mobile device.
3. Open the PRISMAsync Remote Control app on your mobile device.
4. Log in with your Google or Microsoft account that has been registered by the System
administrator. The app opens and shows one or more printers you are connected to.
5. Tap on the wheel icon on the bottom of the screen to configure the settings of the app.
6. Use the app for:
192.
190.
Use the PRISMAsync Remote Control app
Configure PRISMAsync
Chapter 4 - Print a job
4
109