Oce Colorado 1640 Operation Manual page 77

3. Pull the handle of the locking mechanism inside the core towards you. Take the empty media roll
core and slide it on the media shaft.
4. Center the core on the media shaft.
5. Push to place the media shaft back on the winder. Make sure it clicks in place.
After you finish
You can now wind media onto the core, for more information see
tension bar on page
locked tension bar on page
1
0
0
Print and wind with a tension bar on page
79,
86.
Load a take-up roll core onto the roll winder
2
Print and wind without a
Print and wind with a
82,
Chapter 3 - Handle the media 77