Oce Colorado 1640 Operation Manual page 97

2. Push the green levers on both sides of the take-up media roll. Remove the take-up media roll
from the winder.
3. Place the take-up media roll on a sturdy surface.
4. Pull the handle of the locking mechanism inside the core towards you. Remove the media shaft
from the core of the media roll.
1
5. You can place a new empty take-up roll core, for more information see
onto the roll winder on page
1
2
2
76.
Unload a take-up media roll from the roll winder
Load a take-up roll core
Chapter 3 - Handle the media 97