Unsharp lines and text
[8] Text at low temperature
3. Perform media calibration.
4. Check if the media settings in the RIP are correct, especially [Media thickness].
settings on page
5. Perform printhead calibration.
6. Perform printhead carriage calibration.
7. When you are printing in [High quality] print mode, set the [Print strategy] setting to [Print
strategy 3] .
After you finish
When the problem is not solved, contact your application specialist or local Service
representative.
228
Chapter 8 - Troubleshooting and support
Calibrate the media on page
55.
Calibrate the printhead on page
Change the media settings on page
74.
Calibrate the printhead carriage on page
55.
Change the media
167.
168.