Print a job
4. Submit the job.
NOTE
• When you have problems submitting your job, check if the physical width in the RIP
• In Onyx check the box in front of [Specify Physical Width] when you want to set the
• In Caldera you can choose to let the printer or the RIP do the roll selection. Click on
5. Collect your output at the printer.
If requested, tape the media for winding. For more information, see
tension bar on page
locked tension bar on page
106
Chapter 4 - Print a job
corresponds with the width of the media roll.
Take into account the margin used for [Automatic advance correction] (_AAC_NONE,
_AAC_NORMAL, _AAC_ENHANCED). You can check the value that is used for the
[Automatic advance correction] setting in the RIP
page size and physical width manually.
the wrench icon and under [Roll selection], select [Printer] or [RIP].
79,
Print and wind with a tension bar on page
86.
Print and wind without a
82, or
Print and wind with a