Oce Colorado 1640 Operation Manual page 30

Create a new media profile in Onyx
10. You can choose a new media category and/or change the media settings. For more information,
Choose a media category on page
see
11. Give the media a new [Media Type Name] and click on [Ok]. The window closes.
12. Follow the steps.
13. You can change the specific print mode settings under [Basic Print Mode Settings].
14. You can select the print mode and fill in the print mode name. For more information, see
print mode on page
NOTE
Fill in the same name as the selected print mode to avoid confusion.
15. Click on [Mode options]. A new window opens.
16. You can change the rest of the media settings. For more information, see
settings on page
17. Click on [Ok]. The window closes.
18. Finish all the steps to create the media profile.
30 Chapter 3 - Handle the media
61.
55.
Change the media settings on page
53, 55.
Select a
Change the media