Table of Contents
Advertisement
Transmitter Change
The "Transmitter Change" command under the File Menu, is used when it is necessary to change a subscriber's
Transmitter.
Selecting "Transmitter Change" causes the "Locate Subscriber" screen to appear. The subscriber's record in the
Subscriber Database can be quickly found by entering the Subscriber Name, Subscriber Identification Number,
or current Transmitter ID. This method of locating a particular subscriber's record is identical to using the
"Locate Key" command in the Subscriber Database: the first record, which fits the entered data, is shown. It may
be necessary to scroll using the "Previous" and "Next" buttons to find the appropriate record. Perform a "Test"
using the old transmitter if possible, this should fill in the Transmitter ID field. Then press "Find".
CAUTION: Be absolutely certain that the correct record is displayed before entering the new Transmitter
ID (Identification Code). Changing the wrong subscriber's record makes two records ineffective: the
correct subscriber will be misidentified and the subscriber whose record was incorrectly altered will be
disabled. If possible, perform a test with the subscriber's old transmitter after the change has been
made: the test should fail.
When the correct subscriber's record is displayed, click on the "Change" button and perform a "Test" using the
new transmitter. The new Transmitter Identification Code will be automatically entered into the "New transmitter
ID" field.
Security Escort Training
Page 106 of 142
Advertisement
Table of Contents
