Polycom Trio 8800 User Manual page 86

When you set the Base Profile to SkypeUSB, the following functions are not available:
● Dial a number
● Contacts
● Meetings
● Recent Calls
● Meet Now
● Automatic Gain Control (AGC)
● Bluetooth
Connecting Polycom Trio System to a Skype Room
System or Microsoft Surface Hub
Complete the following steps to connect Polycom Trio 8800 and 8500 system with a Skype Room System
or Surface Hub.
To connect Polycom Trio with a Skype Room System or Surface Hub:
1 Update the Microsoft Surface Hub to the latest release version to successfully connect to the
Polycom Trio solution.
2 Power the Polycom Trio system. Refer to
3 Use or update to UC Software 5.4.4AD or later to successfully connect with a Skype Room System
or Surface Hub. Refer to
4 If you did not purchase a Polycom Trio system Skype Room System edition, configure the Polycom
Trio system Base Profile to 'SkypeUSB'. Otherwise, omit this step. Refer to
Trio System with a Skype Room System or Surface
5 Connect the Polycom Trio system to a Skype Room System or Surface Hub via USB cable.
When you connect the USB cable while the Skype Room System or Surface Hub is in a call, both
systems are placed on hold until you re-join the call from either system.
6 On the Skype Room System or Surface Hub you are connecting, configure Polycom Trio as the
audio device - microphone and speaker.
7 (Optional) When the Base Profile of a phone is set to 'Skype' or 'SkypeUSB', access to the Web
Configuration Utility is disabled by default. To enable access to a phone's Web Configuration Utility,
refer to Accessing the Web Configuration
Configuring Polycom Trio System with a Skype Room
System or Surface Hub
The following parameters configure the Polycom Trio 8800 and 8500 system with Skype Room Systems
and Surface Hub.
Polycom, Inc.
Powering the Polycom Trio 8500 and 8800
Polycom UC Software
Utility.
Update.
Hub.
Call Controls
Systems.
Configuring Polycom
86