Polycom Trio 8800 User Manual page 57

Polycom Trio 8800 for AirPlay Parameters
Use the following parameters to configure the Polycom Trio 8800 system for AirPlay certified devices.
Polycom Trio 8800 for AirPlay Parameters
Template Parameter
features.cfg content.airplayServer.au
thType
features.cfg content.airplayServer.di
scovery.bluetooth.enable
d
features.cfg content.airplayServer.en
abled
features.cfg content.airplayServer.ma
xResolution
features.cfg content.airplayServer.na
me
Polycom, Inc.
Permitted Values
none (default) - No security code
for AirPlay certified devices is
required.
passcode - Use a security code
to authenticate AirPlay certified
devices.
Set to allow Airplay discovery
over Bluetooth.
1 (default) - Enables Polycom
Trio 8800 to be discoverable to
AirPlay-certified devices over
Bluetooth. Turns Bluetooth radio
on when
feature.bluetooth.enabled=
1.
0 - Polycom Trio 8800 is not
discoverable to AirPlay-certified
devices over Bluetooth.
Note: To use this feature, enable
the parameter
feature.bluetooth.enabled.
0 (default) - Disable the content
sink for AirPlay certified devices.
1 - Enable the content sink for
AirPlay certified devices.
Set the content resolution.
720p (default)
1080p
1024x1024
960x960
480x480
Specify a system name for the
local content sink for AirPlay
certified devices. If left blank the
previously configured or default
system name is used.
NULL (default)
Content
Restart Causes
Restart or Reboot
No
No
No
No
No
57