Polycom Trio 8800 User Manual page 58

Polycom Trio 8800 for AirPlay Parameters
Template Parameter
features.cfg content.local.authChange
Interval
features.cfg content.local.authChange
Mode
Troubleshooting
This section provides solutions to common issues you may have using the Polycom Trio 8800 system with
AirPlay certified devices.
The Polycom Trio 8800 system does not advertise on my device
The Polycom Trio may not be broadcasting for discovery, or the broadcasts are being blocked.
● Ensure your Apple device is on the same subnet as the Polycom Trio 8800 system and that Polycom
Trio has screen mirroring enabled.
Configuring Debugging Logs
If you experience further issues using AirPlay certified devices with the Polycom Trio 8800 system, you can
enable the following logging parameters on your Polycom Trio to get extended debugging data.
Screen Mirroring Debugging Parameters
Log Component
airp
airpl
airps
lc
Polycom, Inc.
Permitted Values
Session management and communication specifically for AirPlay certified devices.
Protocol library for AirPlay certified devices
Android service AirPlay certified devices
Local Content (including for AirPlay certified devices and PPCIP) session management
Permitted Values
Set the interval in minutes
between changes to the local
content authentication
credentials.
1440 (default)
0 - 65535
0 - Do not change
Specify when the security code
for content sharing with AirPlay
certified devices changes.
session (default) - Code changes
at the end of each content
sharing session.
relativeTime - Code changes at
an interval specified by the
content.local.authChangeIn
terval parameter.
Content
Restart Causes
Restart or Reboot
No
No
58