Polycom Trio 8800 User Manual page 172

● Press Cancel to cancel the automatic software update. When you press Cancel, a DevUpdt soft key
displays on the phone's home screen. Press Dev Updt at any time to update your phone's software.
● Press Details to view information about current and available software.
When the phone is inactive for a long period of time, the phone automatically reboots and updates the
phone's software.
If you want to change the default behavior of the software update any of these parameters, you must
configure the parameters in the following table. Note these parameters are not included in the sample
configuration files Polycom provides in the Microsoft directory of the UC Software download.
Configuring Automatic Software Update
The following table lists parameters that configure automatic software updates and polling of the
provisioning server.
Automatic Software Update Parameters
Template Parameter
device.c device.prov.lyncDeviceUpd
fg, ateEnabled
site.cfg
device.c device.prov.lyncDeviceUpd
fg, ateEnabled.set
site.cfg
reg-advan lync.deviceUpdate.popUpSK
ced.cfg .enabled
Polycom, Inc.
Permitted Values
0 (default) - The automatic
device update is disabled and
the phone does not receive
software updates from the
server. Changing the value of
this parameter reboots the
phone.
1 (default) - The automatic
device update is enabled on
the phone and the phone
receives software updates from
the server.
0 (default) - Disable automatic
device update for all devices.
1 - Enable automatic device
update for all devices and use
device.prov.lyncDeviceUpd
ateEnabled.
0 (disable) - Disable the
Information popup that
indicates when an automatic
software update is available.
1 - Enable the Information
popup that indicates when an
automatic software update is
available.
Device and Software Support
172