Polycom Trio 8800 User Manual page 20

2 Place these configuration files in your root provisioning directory, create a copy of each file, and
rename them keeping the suffix .cfg.
Using edited copies of the template files ensures that you have unedited template files containing the
default values.
3 If you are manually installing a root CA security certificate, go to step 4. If not, go to step 5.
4 Open your renamed file SkypeTrioSharedExample.cfg. If you are manually configuring a root CA
certificate, configure the following two parameters:
 Enter the root CA certificate, in Base64 format, in sec.TLS.customCaCert.1.
 Set the application profile in sec.TLS.profileSelection.SIP.
5 Open the master configuration file 000000000000.cfg. In the CONFIG_FILES field, enter the name
of your Skype for Business configuration file and save.
Ensure that multiple configuration file names are comma separated.
Configuration files you enter in the CONFIG_FILES field are read left to right. If you have configured
the same setting in two configuration files, the setting listed first (left) is applied. Ensure that you do
not have the same parameter in more than one configuration file.
If you do not want to use the Microsoft Autodiscover service, use the following parameters to disable
the feature and manually set the Skype for Business server address and SIP signaling port using:
 Disable Autodiscover: reg.1.serverAutoDiscovery=0
 Server: reg.1.server.1.address=<server_address>
 Port: reg.1.server.1.port=<port_number>
6 Power on your phones. Your phones display the Skype for Business Sign In screen.
Set the Base Profile with device.* Parameters
This section shows you how to provision multiple devices using parameters in the device.cfg template
configuration file included in your UC Software download. Polycom recommends using device.* parameters
to configure multiple devices and only if you are familiar with centralized provisioning and configuration files.
To set the Base Profile using device.* parameters:
1 Locate the device.cfg template configuration file and place the device.cfg file on your
provisioning server.
2 Locate and change the values of the following parameters:
 device.baseProfile=<Base Profile value>
 device.set=1
 device.baseProfile.set=1
3 Rename and save the file.
4 Power on the phones.
5 Once boot-up is complete, remove device.set from the template configuration file and save the
file again after removing device.set.
Polycom, Inc.
Deploying Polycom Phones with Skype for Business
20