Pin Authentication - Polycom Trio 8800 User Manual

● device.logincred.pin="xxxx"
The following example sets SSI login credentials in the configuration file:
● reg.1.auth.loginCredentialType="usernameAndPassword"
● reg.1.address="xxxx@domain.com"
● device.set="1"
● device.logincred.user.set="1"
● device.logincred.user="xxxx"
● device.logincred.password.set="1"
● device.logincred.password="xxxxx"
● device.logincred.domain.set="1"
● device.logincred.domain="domain"

PIN Authentication

You can sign in to Skype for Business using PIN authentication.
To use PIN authentication, you must enable the Web Configuration Utility, which is disabled by default. After
you enable the Web Configuration Utility, you can enable or disable PIN authentication using
reg.1.auth.usePinCredentials.
If you configure DHCP Option 43 in on-premises Skype for Business deployments, the phone displays only
the PIN Authentication menu to users. The PIN Auth menu does not display and is not available for Skype
for Business Online.
Related Links
● To enable or disable the Web configuration Utility, refer to
PIN Authentication Parameters
Parameters listed in the following table configure PIN Authentication sign-in method.
Polycom, Inc.
Accessing the Web Configuration
Sign In Methods
Utility.
145