Polycom Trio 8800 User Manual page 153

Pairing Parameters
Template Parameter
features.cfg smartPairing.mode
features.cfg smartPairing.volume
Identify Paired Devices
If you are using multiple Polycom Trio systems and are not sure which Polycom Trio Visual+ it is paired with
which, you can identify which devices are paired on the Polycom Trio system screen.
To identify paired devices:
1 On the Polycom Trio system, go to Settings > Advanced > Networked Devices, and ensure that
Notification of New Devices is On.
2 Select a device that displays under Paired Devices or Available Devices.
3 Tap Identify to flash the LED of the device you selected.
Place the Polycom Trio Visual+ in Pairing Diagnostic Mode
If you are using multiple Polycom Trio systems and are not sure which Polycom Trio Visual+ it is paired with
which, you can place the Polycom Trio Visual+ devices in pairing diagnostic mode to distinguish between
accessories.
To enter pairing diagnostic mode:
1 Power up the Polycom Trio Visual+ device.
2 Wait for the initial LED on state to turn off.
3 Press and hold the pairing button until the LED turns orange.
4 Release the pairing button.
5 The LED blinks.
6 Wait for the device to reboot.
7 The paired Pod LED is steady green.
Polycom, Inc.
Permitted Values
Enables users with Polycom
Desktop on a laptop or Polycom
Mobile on a tablet to pair with the
Polycom Trio system using
SmartPairing.
disabled (default)
manual
The relative volume to use for
the SmartPairing ultrasonic
beacon.
6 (default)
0 - 10
Hardware and Accessories
Change Causes
Restart or Reboot
No
No
153