Polycom Trio 8800 User Manual page 38

Video and Camera Parameters
Template Parameter
features.cfg video.camera.preset.h
ome.pan
features.cfg video.camera.preset.h
ome.tilt
video.cfg video.camera.preset.h
ome.uponIdle.delay
video.cfg video.camera.preset.h
ome.uponIdle.enabled
video.cfg video.iFrame.period.o
nBoard
features.cfg video.camera.preset.h
ome.zoom
video.cfg video.camera.x.autoWh
iteBalance
Polycom, Inc.
Permitted Values
Set the pan coordinate for a camera
home preset.
Default values are set by and depend
on the camera you are using.
0 - 1000
Set the tilt coordinate for a camera
home preset.
Default values are set by and depend
on the camera you are using.
0 - 1000
Set the number of minutes after the
idle timeout expires to move the
camera to the home preset.
0 (default)
0 - 3600
0 (default) - Do not move the camera
to the home preset when the Trio
system is idle.
1 - Move the camera to the home
preset when the Trio system is idle.
Set the interval in seconds for the VC4
encoder.
180 (default)
300
Set the zoom coordinate for a camera
home preset.
Default values are set by and depend
on the camera you are using.
0 - 1000
Set for per-camera configuration when
you specify the camera type using the
video.camera.x.type parameter.
1 – Enable auto white balance. This
overrides the
video.camera.whiteBalance
parameter.
0 – Disable auto white balance.
Video Features
Change Causes
Restart or Reboot
No
No
No
No
No
No
38