Polycom Trio 8800 User Manual page 129

STUN / TURN / ICE Parameters
Template Parameter
Template
firewall-nat. tcpIpApp.ice.MaxCandidat
cfg eGatheringInParallel
firewall-nat. tcpIpApp.ice.MaxConnecti
cfg vityChecksInParallel
firewall-nat. tcpIpApp.ice.ConnCheckIn
cfg etvalPairs
Polycom, Inc.
Permitted Values
The number of ICE candidates gathering
threads run in parallel in the maximum time
span of 2 seconds for simultaneous
incoming calls only.
2 (default)
2 – 24
The default value for
tcpIpApp.ice.MaxCandidateGatheringI
nParallel parameter is set to 3 when
using VVX 201 business media phone. For
all other VVX platforms, the default value is
set to 5.
The number of ICE connectivity checks
threads run in parallel in the maximum time
span of 30 seconds (connectivity checks
will be complete in 1 sec after answering
call in general) for simultaneous incoming
calls only.
2 (default)
1 – 24
The default value for
tcpIpApp.ice.MaxConnectivityChecksI
nParallel parameter is set as follows
when using the corresponding VVX
platforms:
• For VVX 201, 300, 310, 400 phones,
value is set to 1.
• For VVX 410 phone, value is set to 2.
• For VVX 600 phone, value is set to 3.
• For VVX 301, 311, 401, 411, 500
phones, value is set to 5.
• For VVX 501 and 601 phones, value is
set to 7.
Time interval to serialize first attempt of
connectivity check of identified ice
candidate pairs per call.
25 (default)
25 – 100 ms
Network
Change Causes
Restart or
Reboot
No
No
No
129