Polycom Trio 8800 User Manual page 47

The following table lists video codec parameters and specifies the video codec preferences for the Polycom
Trio 8800 system. To disable codecs, set the value to 0. A value of 1 indicates the codec is the most
preferred and has highest priority.
.
Video Codec Parameters
Parameter
Template
video.codecPref.H264
video.cfg
video.codecPref.H264HP
video.cfg
video.codecPref.H264HP.packetizationM
ode0
video.cfg
video.codecPref.Xdata
video.cfg
video.codecPref.XH264UC
video.cfg
video.codecPref.XUlpFecUC
video.cfg
video.conf.addVideoWhenAvailable
new.cfg
video.conf.profile
video.cfg
video.conf.simulcast.enabled
video.cfg
video.profile.H264.payloadType.packet
izationMode
video.cfg
Polycom, Inc.
Permitted Values
Set the H.264 video codec preference priority.
6 (default)
0 - 8
Set the H.264 High Profile video codec preference priority.
2 (default) - Indicates the codec is the most preferred and has
highest priority.
0 - 8
5 (default)
0 - 8
7 (default)
0 - 5
Set the Remote Desktop Protocol (RDP) codec preference
priority. 1 indicates the codec is the most preferred and has
highest priority. The value 4 is for Skype Base Profile.
Set the Microsoft H.264 UC video codec preference priority.
1 (default)
0 - 8
Set the forward error correction (FEC) codec priority.
8 (default)
0 - 7
0 (default)
1 - When Polycom Trio system is added to a conference by
another participant via digit dialing, the Trio system adds video if
video is available on the conference.
Configure the video media profile request sent to the video
conference server.
3 (default) - Identifies the 540p profile.
2 - 7
1 (default) - Allow sending two different video media resolutions
on a Skype for Business video conference call.
99 (default)
0 - 127
Set the H.264 payload type with packetization mode set to 0.
Video Features
47