Polycom Trio 8800 User Manual page 48

Video Codec Parameters
Parameter
Template
video.profile.H264.payloadType.packet
izationMode1
video.cfg
video.profile.H264HP.jitterBufferMax
video.cfg
video.profile.H264HP.jitterBufferMin
video.cfg
video.profile.H264HP.jitterBufferShri
nk
video.cfg
video.profile.H264HP.payloadType
video.cfg
video.profile.H264HP.payloadType.pack
etizationMode1
video.cfg
video.profile.H264HP.profileLevel
video.cfg
video.profile.H264M.payloadType.packe
tizationMode0
video.cfg
video.profile.Xdata.payloadType
video.cfg
video.profile.XH264UC.jitterBufferMax
video.cfg
Polycom, Inc.
Permitted Values
109 (default)
0 - 127
Set the H.264 payload type with packetization mode set to 1.
2000 (default)
533 - 2500
150 (default)
33 - 1000
70 (default)
33 - 1000
Specify the RTP payload format type for H264/90000 MIME type
(High Profile).
100 (default)
0 - 127
100 (default)
0 - 127
Set the H.264 high profile payload type with packetization mode
set to 1.
4.1 (default)
String (1 - 5 characters)
113 (default)
0 - 127
Set the H.264 high profile payload type with packetization mode
set to 0.
Specify the RTP payload format type for x-data/90000 MIME type.
This parameter is for Remote Desktop Protocol (RDP) content
sharing.
127 (default)
0 - 127
The largest jitter buffer depth to support. Jitter above this size
always causes lost packets. This parameter should be set to the
smallest possible value that supports the expected network jitter.
2000 (default)
533 - 2500
Video Features
48