Polycom Trio 8800 User Manual page 128

STUN / TURN / ICE Parameters
Template Parameter
Template
firewall-nat. tcpIpApp.ice.policy
cfg
firewall-nat. tcpIpApp.ice.NetworkMode
cfg
Polycom, Inc.
Permitted Values
The default policy is set as per the phone
model.
Default (default)
DefaultVVX201
DefaultVVX300
DefaultVVX301
DefaultVVX310
DefaultVVX311
DefaultVVX400
DefaultVVX401
DefaultVVX410
DefaultVVX411
DefaultVVX500
DefaultVVX501
DefaultVVX600
Legacy – Support the legacy behavior of
ICE stack.
Custom – Tune the following ICE
parameters according to network
conditions:
• tcpIpApp.ice.NetworkMode
• tcpIpApp.ice.MaxCandidateGathering
InParallel
• tcpIpApp.ice.MaxConnectivityChecks
InParallel
• tcpIpApp.ice.ConnCheckInetvalPairs
• tcpIpApp.ice.ConnCheckInetvalRetri
es
• tcpIpApp.ice.ReflexiveChecksRequir
ed
• tcpIpApp.ice.MaxRetries
TCPUDP (default) – Gathers all the
possible UDP and TCP ice candidates.
TCPOnly – Gathers all the TCP candidates
along with UDP host candidates.
UDPOnly - Gathers all the UDP
candidates.
Network
Change Causes
Restart or
Reboot
No
No
128