Polycom Trio 8800 User Manual page 60

Wireless Display Parameters
features.cfg content.wirelessDisplay.sink.bi
trate
content.wirelessDisplay.sink.en
features.cfg
abled
features.cfg content.wirelessDisplay.sink.fp
s
features.cfg content.wirelessDisplay.sink.he
ight
content.wirelessDisplay.sink.na
features.cfg
me
features.cfg content.wirelessDisplay.sink.wi
dth
Troubleshooting
This section provides solutions to common issues you may have using Wireless Display on the Polycom
Trio 8800 system.
My Polycom Trio 8800 system does not advertise on my smartphone or tablet
If the Polycom Trio 8800 system does not advertise on your smartphone or tablet device, check the
following:
● Ensure Wi-Fi is enabled on your device and the band is set to 2.4GHz or Auto. The Auto setting
allows the connecting device better access to a free wireless channel.
● Ensure the correct country of operation is set and that both bands are selected on the Polycom Trio
8800 system by configuring the following:
device.wifi.country.set="1"
device.wifi.country="CA"
Polycom, Inc.
Set the content maximum
bitrate in Mbps
30 (default)
0 - 60
0 allows auto-negotiation.
0 (default) - Disable Wireless
Display.
1 - Enable Wireless Display.
Set the content frame rate in
frames per second.
30 (default)
0 - 60
0 allows auto-negotiation
Set the maximum content
height in pixels.
1080 (default)
0 - 1200
0 allows auto-negotiation
NULL - default
Specify a system name for the
local content sink for Android
or Windows devices. If left
blank the previously
configured or default system
name is used.
Set the maximum content
width in pixels.
1920 (Default and Maximum)
0 allows auto-negotiation
Content
No
No
No
No
No
No
60