Polycom Trio 8800 User Manual page 134

Adding Authorized Emergency Contacts on a Locked
Device
You can configure emergency contact numbers that users can call on a locked device in one of two ways:
● Create a policy for emergency numbers on the Skype for Business Server. Note that this method
must be supported by a voice routing trunk configuration.
● Create an authorized list for a line by configuring the value of the parameter
phoneLock.authorized.x.value to a Tel URI or SIP URI, for example,
phoneLock.authorized.1.value="cwi57@cohovineyard.com".
When the Base Profile of the VVX business media phone is set to Skype for Business, you can configure
the phone to set the order of display for the authorized emergency numbers when the device is locked.
Device Lock for Skype for Business Parameters
The following parameters configure the Skype for Business Device Lock feature.
Device Lock Parameters
Parameter
feature.deviceLock.en
features.cfg
able
features.cfg phoneLock.authorized.
x.value
up.btoeDeviceLock.tim
features.cfg
eOut
Polycom, Inc.
Permitted Values
Enables or disables the
Device Lock feature on the
phone.
0 (default) - Device Lock is
disabled.
1 - Device Lock is enabled.
Specify a registered line for
'x' and an authorized call list
when the device is locked
using a Tel URI or SIP URI,
for example,
phoneLock.authorized.
1.value="cwi57@cohovi
neyard.com" .
Configure a time delay after
which the phone locks when
the user locks the computer
paired with the phone.
10 seconds (default)
0 - 40 seconds
Security
Change Causes Restart or
Reboot
No
No
No
134