Fusible Link - Komatsu PW160-7H Operation & Maintenance Manual

CONTROL LEVERS, PEDALS
If any abnormality is detected by the self-diagnostic function, ask
your Komatsu distributor to carry out inspection and repair.
SWITCH SET TEMPERATURE DISPLAY BETWEEN °F AND
°C
It is possible to switch the set temperature display between °F
and °C.
If the "∧" and "∨" portions of temperature setting switch (3) are
pressed at the same time for more than 5 seconds while the fan is
running, the temperature display will switch between °F and °C.
(Note that the unit is not displayed.)
Liquid crystal display range
°C 18.0 to 32.0
°F 63 to 91

FUSIBLE LINK

If the starting motor will not rotate when the starting switch is
turned ON, a possible cause is disconnection of wire-type fusible
link. Open the battery box cover (front right hand side of machine)
to inspect the fusible link and, if necessary, replace it.
REMARK
A fusible link is a large-sized fuse wire installed in the high
current flow portion of the circuit to protect electrical components
and wiring from burning, similar to an ordinary fuse.
140
OPERATION
PW160-7H VEAM390100