Komatsu PW160-7H Operation & Maintenance Manual page 26

GENERAL PRECAUTIONS
WARNING: For reasons of safety, always follow these safety precautions.
Never make any hole in the accumulator or expose it to flame
●
or fire.
Do not weld anything to the accumulator.
●
When carrying out disassembly or maintenance of the accu-
●
mulator, or when disposing of the accumulator, it is necessary
to release the gas from the accumulator. A special bleed
valve is necessary for this operation, so please contact your
Komatsu distributor.
Gas in accumulator, see "HANDLING ACCUMULATORS
(144)"
EMERGENCY EXIT
When exit by normal means is prevented in an emergency
●
you can get out through the emergency exit (rear window).
Pull the ring at the bottom of the window and remove strip.
●
This will allow you to push out glass.
ROTATING BEACON (Option)
When the machine is operated on or beside a road, a rotating
●
beacon is required to avoid a traffic accident.
Contact your Komatsu distributor to install beacon lamp.
●
ELECTROMAGNETIC INTERFERENCE
When this machine is operating close to a source of high electro-
magnetic interference, such as a radar station, some abnormal
phenomena may be observed.
The display on the monitor panel may behave erratically.
●
The warning buzzer may sound.
●
These effects do not signify a malfunction and the machine will
return to normal as soon as the source of interference is removed.
26
SAFETY
PW160-7H VEAM390100