Komatsu PW160-7H Operation & Maintenance Manual page 132

CONTROL LEVERS, PEDALS
2. Use temperature set switch (3) to set to the desired tempera-
ture. The air flow, combination of vents, and selection of fresh
or recirculated air is automatically selected according to the
set temperature, and the air conditioner is operated automati-
cally to provide the set temperature.
REMARK
When vent display monitor (c) displays (d) or (e), and the
engine water temperature is low, the air flow is automatically lim-
ited to prevent cold air from blowing out.
STOPPING AUTOMATIC OPERATION
Press OFF switch (1). The displays for temperature setting (a)
and air flow (b) on the display monitor, and the lamps above auto
switch (5) and air conditioner switch (8) go out, and the operation
stops.
132
OPERATION
PW160-7H VEAM390100