CONTROL LEVERS, PEDALS
●
If all control levers are set to neutral, the engine speed will
drop by approx. 100 rpm, and after approx. 4 seconds, the
engine speed will drop to the deceleration speed (approx.
1400 rpm).
CONTROL LEVER LOCK SWITCH
The Control lever lock switch (located on the monitor panel)
should be engaged when travelling on the Public Highway to
prevent accidental use of the work equipment.
For details, see "CONTROL LEVER LOCK SWITCH (93)"
ON position (actuated).
TRAVEL PEDAL
The travel pedal is used in conjunction with the Forward / Neutral
/ Reverse (F / N / R) switch (6) located on the right control lever.
Select the direction required using F / N / R switch then depress
travel pedal (38) to commence travel.
(1)
Forward
(2)
Neutral
(3
Reverse
BRAKE PEDAL
The service brakes are operated by depressing pedal (37). The
service brakes can be locked in the 'ON' position for digging and
lifting operations, to lock the service brakes in the 'ON' position
fully depress the brake pedal. To unlock the service brakes
depress latch (A).
114
WARNING
RH PPC
PW160-7H VEAM390100
OPERATION
38
1
2
3
37
A
Standard