Operations And Checks Before Starting Engine - Komatsu PW160-7H Operation & Maintenance Manual

OPERATIONS AND CHECKS BEFORE STARTING ENGINE

OPERATIONS AND CHECKS BEFORE STARTING ENGINE
If the control lever is touched by accident, the work
●
equipment or the machine may move suddenly.
When leaving the operator's compartment, always raise
●
the safety lock lever to the LOCK position.
1. Check that safety lock lever (23) is in the LOCK position.
REMARK
In certain conditions it may be possible for the safety lock
lever to contact the left hand arm rest on the operator seat.
to avoid this, always ensure that the left hand arm rest is stowed
in the fully up position before operating the safety lock lever.
2. Select neutral on the right control lever.
3. Insert the key in starting switch (8), turn the key to the ON
position, then carry out the following checks.
156
WARNING
23
LOCK
RH
control
lever
Heat
Off
8
PW160-7H VEAM390100
OPERATION
UNLOCK
Forward
Neutral
Reverse
On
Start