Komatsu PW160-7H Operation & Maintenance Manual page 154

OPERATION
(I) Seat depth adjustment
To adjust the depth of the seat cushion, lift the right hand handle
(9). By moving the seat cushion backwards or forwards the
desired seating position can be reached.
SEAT BELT
Before fitting the seat belt, check that there is no abnormality
●
in the belt or its mounting bracket. If it is worn or damaged,
replace the seat belt.
Even if the seat belt appears normal, replace it every 3 years.
●
The date of manufacture of the belt is shown on the back of
the belt.
Always wear the seat belt during operations.
●
Fit the seat belt so that it is not twisted.
●
FASTENING AND REMOVING SEAT BELT
This seat belt has a retractor, so it is not necessary to adjust the
length.
Fastening seat belt
Hold grip (2) and pull the belt out from the retractor (1), check that
the belt is not twisted, then insert tongue (3) into buckle (4)
securely.
Pull the belt lightly to check that it is properly locked.
Removing belt
Press button (5) in buckle (4), and remove tongue (3) from the
buckle (4).
The belt is automatically spooled, hold grip (2) and return the belt
slowly to the retractor (1).
ADJUSTMENT OF OPERATOR'S SEAT (MECHANI-
CAL SEAT)
(A) Fore-and aft adjustment of seat
For details, see "(A) Fore-and-aft adjustment of seat
(152)"
(B) Forward/aft adjustment of seat
For details, see "(B) Forward/aft adjustment of seat and
base (152)"
154
9
PW160-7H VEAM390100
OPERATION