Komatsu PW160-7H Operation & Maintenance Manual page 233

MAINTENANCE
● Use API classification CE or CF-4 as engine oil. If API classi-
fication CD is used reduce the engine oil change interval to
half.
There is no problem if single grade oil is mixed with multi-
●
grade oil (SAE10W-30, 15W-40), but be sure to add single
grade oil that matches the temperature in the table.
We recommend Komatsu genuine oil which has been specifi-
●
cally formulated and approved for use in engine and hydraulic
work equipment applications.
When fuel sulphur content is less than 0.5%, change oil in the
●
oil pan every periodic maintenance hours described in this
manual.
Change oil according to the following table if fuel sulphur con-
tent is above 0.5%.
Fuel sulphur content I
0.5 to 1.0%
1.0% to 1.5%
Specified capacity: Total amount of oil including oil for compo-
nents and oil in piping.
Refill capacity: Amount of oil needed to refill system during nor-
mal inspection and maintenance.
Abbreviations:
ASTM: American Society of Testing and Material
SAE: Society of Automotive Engineers
API: American Petroleum Institute
PW160-7H VEAM390100
USE FUEL, COOLANT AND LUBRICANTS ACCORDING TO AMBIENT TEMPERATURE
Change interval of oil in engine
oil pan
1/2 of regular interval
1/4 of regular interval
SPECTRUM XXX
KOMATSU GENUINE LUBRICANTS
TYPE CLASS VISCOSITY
Engine oil CF - 4 SAE15W - 40
CF - 4 SAE10W - 30
TRANSMISSION OIL CD SAE10W
& GEAR BOX OIL CD SAE10W
CD SAE30
CD SAE50
HYDRAULIC OIL CD SAE10W
BIO HYDRAULIC OIL SAE10W
GREASE
BIO GREASE
ANTI FREEZE
BIO ANTI FREEZE
REF.NO
EO - 1540
EO - 1030
TO - 10
STO - 10
HEAVY DUTY
TO - 30
TO - 50
HO - 10
BO - 10
LG - N2
BIO - R2
AF - 03
BIO - AF - 0
233