Komatsu PW160-7H Operation & Maintenance Manual page 94

EXPLANATION OF COMPONENTS
5. MENU SELECT SWITCH
This switch (5) is used to select the hydraulic flow setting in each
of the working modes A, E, and B.
When the working mode is A or E
●
1. Press select switch (5) and the normal screen on the monitor
display changes to the flow setting screen shown in the dia-
gram on the right.
Press up switch (14) or down switch (13) to adjust to the desired
flow. Each segments value is shown below.
2. After completing the flow setting, press input confirmation
switch (12).
The monitor display will return to the normal screen.
REMARK
The flow can be adjusted for the attachment installed.
When the working mode is B mode
●
1. Press select switch (5) and the normal screen on the monitor
display changes to the flow setting screen shown in the dia-
gram on the right.
2. Press up switch (14) or down switch (13) to adjust to the
desired flow.
3. After completing the flow setting, press input confirmation
switch (12).
4. With the operation in Step (3), the flow setting screen
changes to the fine flow adjustment screen shown in the dia-
gram on the right.
5. Press up switch (14) or down switch (13) to adjust to the
desired flow.
6. After completing the flow setting, press input confirmation
switch (12).
The monitor display will return to the normal screen.
94
OPERATION
14
13
12
PW160-7H VEAM390100