Komatsu PW160-7H Operation & Maintenance Manual page 32

PRECAUTION DURING OPERATION
WARNING: For reasons of safety, always follow these safety precautions.
DO NOT HIT WORK EQUIPMENT
When working in places where there are height limits, such as
●
in tunnels, under bridges, under electric cables, or in garages,
be extremely careful not to hit the boom or arm.
ENSURE GOOD VISIBILITY
When working in dark places, install working lamps, and set
●
up lighting in the work area if necessary.
Stop operations if the visibility is poor, such as in mist, snow,
●
or rain, and wait for the weather to improve to a condition that
allows the operation to be carried out safely.
OPERATE CAREFULLY ON SNOW
When working on snow or icy roads, even a slight slope may
●
cause the machine to slip to the side, so always travel at low
speed and avoid sudden starting, stopping, or turning.
When there has been heavy snow, the road shoulder and
●
objects placed beside the road are buried in the snow and
cannot be seen, so always carry out snow-clearing operations
carefully.
WORKING ON LOOSE GROUND
Avoid operating your machine too close to the edge of cliffs,
●
overhangs, and deep ditches. If these areas collapse, your
machine could fall or tip over and result in serious injury or
death. Remember that the soil after heavy rain or blasting is
weakened in these areas.
Earth laid on the ground and the soil near ditches are loose.
●
They can collapse under the weight or vibration of your
machine.
Install the HEAD GUARD (FOPS) if working in areas where
●
there is danger of falling rocks and dirt.
DO NOT HIT THE OPERATOR CAB (for two piece boom only)
When the second boom cylinder is retracted, the bucket or
●
the attachment can hit the operator cab or chassis.
Operate work equipment slowly and carefully to avoid any
●
injury and damage.
32
SAFETY
PW160-7H VEAM390100