MAINTENANCE
EVERY 100 HOURS SERVICE
Maintenance every 50 hours should be carried out at the
same time.
LUBRICATING
The minimum greasing interval is 100 hours, however more fre-
quent greasing will be required depending on conditions/environ-
ment.
1. Set the work equipment in the greasing posture below, then
lower the work equipment to the ground and stop the engine.
2. Using a grease pump, pump in grease through the grease fit-
tings shown by arrows.
3. After greasing, wipe off any old grease that was pushed out.
PW160-7H VEAM390100
SERVICE PROCEDURE
273